DVTEL Pro Line 9460A, User Manual

Page: 14 / 58

Pro Line 9460A User’s Manual
2-6
Recess Mount
The Pro Line 9460A units are provided with fold out wings for quick and easy installation into a
ceiling without the need for a special mounting kit. To use the fold out wings, turn silver-colored
screws clockwise to first extend the locking arms and then tighten them against the mounting
surface. Tighten the screws sufficiently to compress the o-ring moisture seals located underneath
the screw heads, however: DO NOT OVERTIGHTEN.
Note:
For outdoor installations or wet environments always install the large rubber gasket to seal the
dome properly to maintain the IP rating.
If mounting in a drop ceiling a backer plate may be needed depending on the integrity of the
ceiling tile. You could also attach a pipe hanger to the tapped hole in the bottom of the housing
for additional support.