DVTEL Ariel EN-204, User And Installation Manual

Page: 60 / 112

EN-204 User and Installation Guide
48
5.4.3.5 Setting the Motion Detection Triggered Actions
Select the Triggered Actions tab to set the actions which are taken for the detected motion. The
Motion Detection Triggered Actions screen opens.
Figure 48: Motion Detection Triggered Actions Screen
To set the motion detection triggered action
In the Actions area, check the action:

Notify Surveillance Center – When an event occurs, an ONVIF alarm
message is sent to the remote client PC in the Video Management
System.

Send Email – When an event occurs, an email is sent with alarm
information to a user or users. To configure email settings, see Email
(page 63).
Upload to FTP – Capture the image when an alarm is triggered and upload the picture to a
FTP server
.
To configure FTP settings, see
Note:
You must reboot the unit in order to activate the settings.

FTP (page 67).
In the Trigger Alarm Output area, do one of the following when a motion detection event
occurs:

Check Select All to trigger an external alarm output on both alarm
outputs.

Check A->1 to trigger an external alarm output on alarm output 1

Check A->2 to trigger an external alarm output on alarm output 2.