DVP TDC 150, Operating And Maintenance Instructions Manual, Page: 3 / 27

User and maintenance manual
EN
TSC - TDC
2
8702040 – 14/01/2019 – R.7 www.dvp.it
1 INTRODUCTION
1.1 GENERAL INFORMATION
With this manual we aim to provide you with all the important information regarding the safety of those in charge
of installation, use, maintenance and dismantling of the TSC and TDC series side channel turbines.
This manual, issued in ITALIAN, is an integral part of the turbine and must be kept in a safe place for the entirety
of the machine's lifespan.
Should the turbine be sold, hired out, or loaned, it must be handed over to the new owner together with the EC
conformity Declaration.
Carrying out any operations on the turbine before reading and fully understanding all instructions in this manual is
prohibited.
The images contained in this document are examples only and are not binding for the Manufacturer. The
Manufacturer reserves the right to make changes to components, make product improvements or for any other
reason without updating this manual, if said components or parts do not alter the side channel turbine operation
and safety.
1.2 MANUFACTURER DATA
D.V.P. Vacuum Technology s.p.a.
Via Rubizzano, 627
40018 - S. Pietro in Casale (BO) - ITALY
Ph +3905118897101
Fx +3905118897170
e-mail: info@dvp.it
web site: http://www.dvp.it
Please always include the following information in all communications regarding the turbine:

turbine model and serial number;

year of manufacture;

date of purchase;

detailed information regarding problems verified.
1.3 CONSULTATION METHODS
For improved understanding of the information provided in this manual, warnings or instructions considered critical
or hazardous are marked with the following symbols:
HAZARD
Failure to comply with these instructions may cause hazards to persons.
WARNING
Failure to comply with these instructions may cause damage to the turbine.
1.4 PERSONNEL QUALIFICATIONS
To ensure that all operations performed on the turbine are carried out safely, operators must have the qualifications
and requirements to carry out its operations.
Operators are classified as follows:
FIRST LEVEL OPERATOR:
Unqualified personnel, having no specific skills, able to perform simple tasks only.
MECHANICAL MAINTENANCE OPERATOR:
Technician qualified to work on mechanical parts to carry out any necessary adjustments, maintenance
operations or repairs. Not qualified to work on electrical systems in presence of voltage.
ELECTRICAL MAINTENANCE OPERATOR:
Qualified technician in charge of all electrical operations. Is capable of operating in the presence of
voltage inside cabinets and connector boxes.