3
RMO40TD Introduction, Safety Instructions
1
Introduction
This Manual contains helpful instructions on how to use RMO40TD in a safe, proper and efficient way.
Following these instructions can help you avoid dangerous situations, repair costs and other miss
happenings due to incorrect operation. Furthermore it ensures the reliability and life cycle of your
RMO40TD.
RMO40TD must be used in observance of all existing safety requirements and regulations from
national/local standards for accident prevention and environmental protection.
Reading the RMO40TD Manual alone does not exempt the user from the duty of complying with all
national and international safety regulations relevant for working with RMO40TD.
2
Safety Instructions
Before operating RMO40TD, please read carefully the following safety instructions.
It is not recommended that the RMO40TD is used (or even turned on) without the understanding of this
Manual.
RMO40TD should only be operated by trained and authorized personnel.
Rules for Use
• RMO40TD should only be used when in a technically fit condition. Its use should be in accordance
with the safety regulations for the actual working site and application. Always be aware of the dangers
of high voltages and currents associated with this equipment and its environment. Pay attention to the
information provided in the Manual.
• RMO40TD is intended exclusively for the application areas specified in ”Designated Use”. The
manufacturer and distributors are not liable for damage resulting from wrong usage. The user alone
assumes all responsibility and risk.
• The instructions provided in this Manual are considered part of the rules governing proper usage.
• Do not open RMO40TD.
All service and maintenance work must be performed by qualified
personnel.
Orderly Practices and Procedures
• The Manual should always be available on the site where the RMO40TD is used.
• Before using RMO40TD, all personnel (even personnel who only occasionally, or less frequently, work
with RMO40TD) assigned to RMO40TD should read the operations Manual.
• Do not undertake any modifications, extensions, or adaptations to the RMO40TD.
• Use RMO40TD in conjunction with original accessories only.
• Use both RMO40TD and its original accessories for its designated use only.
Cleaning
To clean RMO40TD, use a cloth dampened with isopropanol alcohol or water.
Operator Qualifications
• Testing with RMO40TD should only be carried out by authorized and qualified personnel.
• Personnel receiving training, instruction, direction or education on the RMO40TD should remain under
the constant supervision of an experienced operator while working with the test set and the test
object.
