23
RMO40TD DV-Win Software
7
DV-Win Software
DV-Win is a Windows program developed to work with RMO40TD Tap Changer Analyzers & Winding
Ohmmeters. It enables the two-way communication between RMO40TD and a PC over the USB.
DV-Win supports the following functions:
Controlling and starting RMO40TD when tests are performed from the PC; the results could be
stored to PC; results reading interval is adjustable,
Transfer of test parameters from internal RMO40TD memory to the PC.
Note:
While using DV-Win software, RMO40TD can only be operated from DV-Win. All buttons on the
front panel of RMO40TD device are locked, except the
STOP
button.
Data transferred from RMO40TD can be:
- Downloaded in the grid in the form of a table,
- Saved as a PDF, XLS, DOC or RTF file,
Every test reading contains:
- The date and the time of the test,
- The transformer connection (if selected),
- The test mode,
- The real test current,
- The measured resistance values,
- The measured voltage values,
- The measured ripple values,
- The transition time values,
- The tap changer positions,
- The memory location.
7.1 System Requirements
7.1.1 Minimum Configuration
Processor:
Intel Pentium IV 1GHz
Memory:
1 GB
OS:
Windows XP, Windows Vista or Windows 7
7.1.2 Recommended Configuration
Processor:
2 GHz
Memory:
2 GB
OS:
Windows XP, Windows Vista or Windows 7
7.2 DV-Win installation
To install the DV-Win software do the following:
- Connect the RMO40TD to the PC via USB cable and turn the RMO40TD on
- Insert the DV-Win installation CD into the CD-ROM drive,
- Click
”Start”,
- Click
”Run”,
- Click
”Browse”,
- Select the CD-ROM drive,
- Highlig
ht the ”DV-Win.exe” file,
