Battery Voltage Recorder BVR11
M-B011VR-202-EN
3
1. Introduction
The purpose of this Manual is to provide helpful instructions on how to use the BVR11 instrument safely,
properly and efficiently.
The following instructions will help the user to avoid unsafe situations, reduce maintenance costs and will
ensure the reliability and durability of the BVR11 instrument.
BVR11 must be used in accordance with all existing safety requirements and regulations based on
national/local standards for accident prevention and environmental protection. In addition, the relevant
international standards are listed in paragraph 8 of the “Technical data” section of this document.
1.1.
Safety Instructions
Safety is the responsibility of the user. Before operating the BVR11, please read the following safety
instructions carefully.
It is not recommended that the BVR11 is used (or even turned on) without careful observation of the
instructions listed in this Manual. The BVR11 should only be operated by trained and authorized
personnel.
1.1.1. Terms of Use
The BVR11 shall be used only if it is in good technical condition. Its use shall be in accordance with
local safety and industrial regulations. Adequate precautions must be taken to avoid any risks related
to high voltages associated with this equipment and nearby objects.
The BVR11is intended exclusively for the application purposes specified in the ”Intended Use” section.
The manufacturer and distributors are not liable for any damage resulting from wrong usage. The user
bears responsibility in case of not following the instructions defined in this document.
Do not remove the protective casing of BVR11.
All service and maintenance work must be performed by qualified personnel only.
1.1.2. Orderly Practices and Procedures
The Manual shall always be available on the site where the BVR11 is used.
Before using BVR11, all personnel (even personnel who only occasionally, or less frequently, work
with BVR11) assigned to operate the BVR11 should read this Manual.
Do not make any modifications, extensions, or adaptations to the BVR11.
Use the BVR11 only with the original accessories provided by its manufacturer.
Use the BVR11 and its original accessories for the device‟s intended use only.
1.1.3. Instrument Maintenance
The device should be kept clean in order to prevent excessive cases of dust or other contaminants
affecting its operation. It should be cleaned with water/isopropyl alcohol after any dirt/contaminants are
noticed on its surfaces.
1.1.4.
Operator’s Qualifications
Testing with the BVR11 should only be carried out by authorized and qualified personnel.
Personnel receiving training, instruction or education on the BVR11 should remain under the constant
supervision of an experienced operator while working with the test set and the test object.
