Battery Voltage Recorder BVR11
M-B011VR-202-EN
10
3.2.2.4.
String voltage measurement
When the BVR11 detects voltage values within the range of a user selected string limit values in the
Settings menu
(Section 3.2.3), the BVR11 automatically enters in the String measurement mode. In this
mode, the BVR11 stores measurement results in a special memory location assigned to the String
values set of measurements.
The String measurement for the example in the Fig. 3-9 corresponds to the memory location 3.1.0.
Individual cell voltages for the corresponding string are memorized as measurement numbers 3.1.1,
3.1.2, 3.1.3 etc.
In case the user wants to repeat one of previous measurements, the return to the previous measurement
is enabled by pressing the
LEFT
button on the device.
If any of the test parameters need to be changed, return to the
Main Menu
screen by pressing
STOP
.
Note:
Test results in the
Voltage Recorder mode
are automatically saved to the SD Card.
The test results are displayed in different colors based on the value and defined limits:
in green, if the result is within the limits, followed by a beep sound
in blue, if the result is above the upper limit, followed by an extended sound
in red, if the result is below the lower limit, followed by an extended sound
Figure 3-9:
String voltage
measurement
– Voltage
recorder mode
Figure 3-8:
The
Measurement
Menu
– Current probe
mode
