Battery Voltage Recorder BVR11
M-B011VR-202-EN
16
4.
SD Card Initialization Error Messages
The BVR11 device has one 2 GB Micro SD card installed. It is used to store internal device information, test
data and it enables data export.
4.1.
Initialization failure during startup of the BVR11
The SD card is initialized during the device startup stage. If there is no SD card in the SD card slot, or if the
initialization is not successful, the following message will be displayed.
4.2.
Initialization failure in Measurement menu
In case the BVR11 fails to memorize measured voltage values in the
Measurement menu
, the device will
display the error message for three seconds and return to the
Main Menu
. The status message will be
displayed in the
Measurement Menu
as presented in the Figure 4-2.
.
Figure 4-1:
Error message
"
SD Card init failed
"
Figure 4-2:
Error message
"
Data could not be
saved to memory
"
