OPERATIONS
Dustbane Products Limited
Remove electrical cord and literature
from recovery tank. Fill solution tank
(see filling instructions page 7).
Adjust brush to proper setting.
Note:
For good operation the brush must
skim the carpet. If circuit breaker
trips raise brush to prevent damage
to motor or carpet.
Plug cord into grounded outlet.
Note: Be sure
dome is seated on recovery tank, and float
shut-off is installed correctly.
STEP
1
STEP
2
STEP
3
STEP
4
CORRECT
INCORRECT
1/8in
(3mm)
PUMP
VACUUM
ON
ON
Turn on both Vacuum and Pump
motor switches (“ON”=“I”).
3-6
