Duratech TC-12, Operating Instructions And Parts Reference

Page: 20 / 158

10
T C - 1 2 T R E E C H I P P E R O P E R A T I N G I N S T R U C T I O N S
NOTE:
Additional copies of the above mentioned materials can be obtained from your dealer.
• Allow only responsible, properly instructed individuals to operate your machine. Carefully supervise in -
experienced operators.
• Make sure the machine is in good operating condition and that all protective shields are in place and in
proper working order. Replace damaged shields before operating.
• Be sure all bystanders and other workers are clear before starting the TC-12 TREE CHIPPER. Machine
should be in a restricted area from people passing by and the area around the machine should be clear of
all objects that can obstruct your movement when working with the machine.
• Machine should never be operated unless hooked to a towing vehicle.
• Make no modifications to the machine unless specifically recommended or requested by DuraTech Indus -
tries.
• Check periodically for breaks or unusual wear and make necessary repairs.
• Do not wear torn or loose clothing as they can get caught in moving machinery and tree branches. Items
such as long hair, shirt sleeves and shirt need to be kept contained. Wear all personal protection equip -
ment and follow all safety standards.
During operation
• Operators need to be located within easy reach of all feed controls and shut-off devices when the unit is
running. Always be attentive and prepared to activate the devices.
• Always know the direction of the discharge chute before chipping. Never stand in front or direct the
chute towards anyone or any thing.
• Never allow anyone to sit, stand, lay, climb or ride on the TC-12 TREE CHIPPER while it is running, op -
erating, or in transit.
• Emergency stop switches (will shut down the engine when pressed)
Emergency stop
(left control panel)
Emergency stop
(right control panel)