Duratech TC-12, Operating Instructions And Parts Reference

Page: 15 / 158

5
T C - 1 2 T R E E C H I P P E R O P E R A T I N G I N S T R U C T I O N S
DuraTech Industries uses industry accepted ANSI standards in labeling its products for safety and operational charac-
teristics.
DANGER: Indicates an imminently hazard-
ous situation that, if not avoided, will result in
death or serious injury. This signal word is to
be limited to the most extreme situations, typi-
cally for machine components that, for func-
tional purposes, cannot be guarded.
WARNING:
Indicates a potentially hazardous
situation that, if not avoided, could result in
death or serious injury, and includes hazards
that are exposed when guards are removed. It
may also be used to alert against unsafe prac-
tices.
CAUTION:
Indicates a potentially hazardous
situation that, if not avoided, may result in mi -
nor or moderate injury. It may also be used to
alert against unsafe practices.
Safety-Alert Symbol
Read and recognize safety information. Be alert to
the potential for personal injury when you see this
safety-alert symbol.
DANGER
INFORMATION
CAUTION
WARNING
This manual uses the symbols to the right to denote impor-
tant safety instructions and information.
The DANGER , WARNING and CAUTION symbols
are used to denote conditions as stated in the text above.
Furthermore, the text dealing with these situations is sur -
rounded by a box with a white background, will begin
with DANGER , WARNING , or CAUTION .
The INFORMATION symbol is used to denote important
information or notes in regards to maintenance and use of
the machine. The text for this information is surrounded
by a box with a light grey background, and will begin with
either IMPORTANT or NOTE .