Duratech HAYBUSTER 107C DRILL Operating Instructions And Parts Manual Download

Page: 54 / 166

7 7 C / 1 0 7 C D R I L L S

O P E R A T I N G I N S T R U C T I O N S

APPENDIX A: WARRANTY

Duratech Industries International, warrants to the original purchaser for one year from purchase date that this product

will be free from defects in material and workmanship when used as intended and under normal maintenance and

operating conditions. This warranty is limited to the replacement of any defective part or parts returned to our factory

in Jamestown, N.D., within thirty (30) days of failure.

This warranty shall become void if in Duratech Industries International’s judgment the machine has been subject to

misuse, negligence, alterations, damaged by accident or lack of required normal maintenance, or if the product has been

used for a purpose for which is was not designed.

All claims for warranty must be made through the dealer which originally sold the product and all warranty adjustments

must be made through same.

This warranty does not apply to tires or bearings or any other trade accessories not manufactured by Duratech

Industries International. Buyer must rely solely on the existing warranty, if any, of these respective manufacturers.

Duratech Industries International shall not be held liable for damages of any kind, direct, contingent, or consequential

to property under this warranty. Duratech Industries International cannot be held liable for any damages resulting from

causes beyond its control. Duratech Industries International shall not be held liable under this warranty for rental costs

or any expense or loss for labor or supplies.

Duratech Industries International reserves the right to make changes in materials and/or designs of this product at any

time without notice.

This warranty is void if Duratech Industries International does not receive a valid warranty registration card at its office

in Jamestown, N.D., within 10 days from date of original purchase.

All other warranties made with respect to this product, either expressed or implied, are hereby disclaimed by Duratech

Industries International.

Summary of Contents for HAYBUSTER 107C DRILL







































































































































































Search results

Summary of Contents for HAYBUSTER 107C DRILL

Reviews:

Related manuals for HAYBUSTER 107C DRILL

Brands by name

Popular brands

Duratech HAYBUSTER 107C DRILL, Operating Instructions And Parts Manual

Search results

Summary of Contents for HAYBUSTER 107C DRILL

Reviews:

Related manuals for HAYBUSTER 107C DRILL

Brands by name

Popular brands