manualshive.com logo in svg

Duratech HAYBUSTER 107C DRILL, Operating Instructions And Parts Manual

Share
Download
Duratech HAYBUSTER 107C DRILL Operating Instructions And Parts Manual Download Page 11

3

7 7 C   / 1 0 7 C   D R I L L S  

 

O P E R A T I N G   I N S T R U C T I O N S

Section 1:  Safety

The safety of the operator is of great importance to DuraTech Industries/Haybuster.  We have provided decals, shielding 

and other safety features to aid you in using your machine safely.  In addition, we ask you to be a careful operator who 

will properly use and service your Haybuster equipment.

WARNING:

  FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS THAT FOLLOW 

WITHIN THIS MANUAL COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH. 

BEFORE ATTEMPTING TO OPERATE THIS MACHINE, CAREFULLY READ ALL 

INSTRUCTIONS CONTAINED WITHIN THIS MANUAL.  ALSO READ THE INSTRUCTION 

MANUAL PROVIDED WITH YOUR TRACTOR.

THIS MACHINE IS NOT TO BE USED FOR ANY PURPOSE OTHER THAN THOSE 

EXPLAINED IN THE OPERATOR’S MANUAL, ADVERTISING LITERATURE OR OTHER 

DURATECH INDUSTRIES WRITTEN MATERIAL PERTAINING TO THE 77C/107C GRAIN 

DRILL.

1.1  Safety-alert symbols

Decals are illustrated in 

Part 2: Parts Reference.

 

The safety decals located on  your machine contain important and useful information that will help you operate your 

equipment safely.

To assure that all decals remain in place and in good condition, follow the instructions below:

• 

Keep decals clean.  Use soap and water - not mineral spirits, adhesive cleaners and other similar cleaners 

that will damage the decal.

• 

Replace all damaged or missing decals.  When attaching decals, surface temperature of the machine must 

be at least 40° F (5° C).  The surface must be also be clean and dry.

• 

When replacing a machine component to which a decal is attached, be sure to also replace the decal.

• 

Replacement decals can be purchased from your Haybuster dealer.

Summary of Contents for HAYBUSTER 107C DRILL







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands