Duratech HAYBUSTER 107C DRILL, Operating Instructions And Parts Manual

Page: 25 / 166

17 7 7 C / 1 0 7 C D R I L L S O P E R A T I N G I N S T R U C T I O N S
Section 3: Introduction
Every effort has been made to ensure that the information contained in this manual is correct at the date of publication;
but, due to continuous improvements, DuraTech Industries reserves the right to make changes in the contents without
notice or obligation.
This manual is shipped with each machine to familiarize the operator with the proper operating, maintenance and
lubrication instructions to insure the best possible performance and service from the machine. Study and understand
these instructions thoroughly before operating the machine. We recommend that this manual be readily available for
reference at all times. Consult your DuraTech Industries dealer if any items in this manual are not understood.
DuraTech reserves the right to make changes in engineering, design and specifications, add improvements, or
discontinue manufacture at any time without notice or obligation.
3.1 Ordering Parts
When ordering parts always specify your model number, serial number, and the number of the parts you wish to order.
IMPORTANT:
WHEN REPLACEMENT PARTS ARE NEEDED, USE THE LISTED PART
NUMBERS AND DESCRIPTIONS TO INSURE FAST AND ACCURATE SHIPMENT OF YOUR
ORDER. WHEN ORDERING PARTS ALWAYS SPECIFY UNIT SERIAL NUMBER.
ONLY AUTHORIZED PARTS SHOULD BE USED FOR REPAIR AND/OR REPLACEMENT.