DURAG D-LX 200, Manual

Page: 30 / 116

Product Description
3.9 Identification of the product
The type plate is located on the lower side of the housing.
3.10 Notes on warranty
Please note that the contents of this device manual are not part of nor
intended to modify a previous or existing agreement, undertaking or legal
relationship. The warranty for equipment from the DURAG GROUP is
generally 12 months from the date of delivery. All obligations result from the
respective purchase contract, which also contains the complete and solely
valid warranty regulation. These contractual warranty terms are neither
extended nor limited by the comments in this document.
Modifications and alterations to the Compact Flame Monitor are not permitted.
Any interventions on the device will result in termination of the warranty.
As burner controls and flame monitors are type-approved devices, any
interventions or modifications to them will result in
loss of the approval .
Faultless and safe operation of this device also requires appropriate transport,
correct storage, installation and assembly as well as careful operation.
A high level of reliability is expected from safety-relevant components like
Compact Flame Monitors. Careful maintenance is a basic prerequisite for safe
operation. This is essential to ensure that functional irregularities are detected
and rectified at an early stage.
Approx. 10 years after commissioning at the latest (
≙
250,000 cycles; see also
EN 298 and EN 230) with typical use and environment of the D − LX 200,
D − LX 720, the tests and maintenance measures specified for the product
by the manufacturer must be performed by the manufacturer or his
representative. These measures can also result in replacement of the product.
30
D − LX 200, D − LX 720