DURAG D-LX 200, Manual

Page: 21 / 116

Safety Instructions

Exact knowledge of operation-related dangers

Knowledge of system conditions, pertinent standards, regulations and
accident prevention regulations.

Adequate knowledge of the system D − LX 200, D − LX 720. DURAG offers
suitable training for this purpose.
On the basis of this training, qualified personnel are authorised by the person
responsible for the safety of people and system to carry out work on DURAG
equipment or systems,

either as project planning personnel, are familiar with the safety concepts
of automation technology,

as operating personnel, are instructed in handling automation technology
equipment and are familiar with the contents of this manual relating to
operation,

as repair and/or service personnel, have training that qualifies them to
repair such automation technology equipment or have authorisation to
commission, earth and identify circuits and devices/systems in
accordance with the safety-related standards.
Burner controls and flame monitors are type-approved devices. Any
interventions or modifications will result in loss of the approval.
The abovementioned qualifications and authorisations expressly do not apply
for interventions or modifications to type-approved devices!
Repairs may therefore only be carried out by the manufacturer or his
representatives. This is necessary to ensure that tests and measurements
(with the requisite special devices and specialist knowledge) prescribed after
repairs or other interventions can be performed.
Burner controls and flame monitors serve for the safe operation of a furnace
plant. The reliability of these devices is essential, and requires particularly
careful inspection of the relevant functions with a concluding acceptance test
after interventions.
D − LX 200, D − LX 720
21