DURAG D-LX 200, Manual

Page: 69 / 116

D − LX 200 InformationCentre PC Version
D − LX 200, D − LX 720
69
7 D − LX 200 InformationCentre PC Version
The D − LX 200, D − LX 720 evaluation software "D − LX 200 InformationCentre"
is designed to display and store the date of these devices. Originally
developed for DURAG Service technicians, the configuration help is now also
available to enable effective and time-saving performance of adjustment tasks.
The software is
not
a constituent of the Compact Flame Monitor D − LX 200,
D − LX 720 and can be modified or limited in functionality at any time without
prior notice. There is no entitlement to the "InformationCentre". In the event of
program modifications, generally only the online help is updated promptly.
Although the evaluation software and the associated information have been
compiled with the greatest care, all liability must be excluded. The exclusion of
liability is acknowledged with installation of the software on the computer.
7.1 System requirements
The system requirement is an IBM-compatible PC with Microsoft Windows
2000 or Microsoft Windows XP operating system.
The recommended performance features of the system are min. 1GHz
processor, 256MByte RAM and a screen resolution of 1024*768. The font size
setting should be 96 dpi, as otherwise incorrect displays can result.
Data is transferred between D − LX 200, D − LX 720 and PC via an RS-485
interface. If the PC does not have a serial interface (COM), an appropriate
USB to RS 485 adapter can be used. If a true serial interface is present, an
RS232 to RS485 (2-wire) converter is required.
7.2 Installation
To install the software, the Setup.Exe is started in the folder "D-LX 200
Installer". The program should be installed in the folder "C:\Programs\D-LX
200\" if possible, and is ready for execution when installation is complete.
The D − LX 200, D − LX 720 is connected to the PC either with an RS232/RS485
or a USB/RS485 adapter (see connection plan Figure 11.1 page 103).
The interface configuration of the PC must be set
before starting the software,
i.e. the USB/RS485 adapter must be connected and installed, using the
manufacturer's driver CD if necessary. The PC's interface setting can be
checked under:
"Workstation
 System properties  Hardware  Device manager 
Connections"
.
The correct Modbus slave address must be set in the device (D − LX 200,
D − LX 720). See chapter 6.4 from page 59. The Modbus slave address is set
to "1" at delivery.
7.3 Start / Execute
During installation, an entry is created automatically in the Windows start
menu:
"Start
 Programs  D-LX 200  D − LX 200 InformationCentre"