Duracomm | 9
Open a Web Connection to the Unit
Connect the remote monitoring unit to your network using an Ethernet cable with a RJ-45 connector.
Use your favorite device and browser (Chrome, Firefox, Internet Explorer, etc.), and enter the IP address of the power
supply on your network into the URL box on the browser (see the screenshot below). If you are unable to connect to the
device with the browser, you will need to use a terminal with a USB connection to access the device and configure the IP
address. If the unit responds with the “Status” screen, you can skip to the ‘User Login’ Section. You may want to refer to
the ‘User Setup’ section now or later to change user account information or, if necessary, perform a factory reset.
Figure 5. Enter IP address to connect to the PS Series unit.
Enter IP address in your browser and press “Enter” key
