Duracomm | 6
Front Panel Switch / Indicators
Figure 1. Front panel layout.
Front Panel Display
•
The screen will auto-scroll through the status sensors of the power supply.
•
Pressing the button at any time will exit the current menu and display the hardware and firmware version of
the remote monitoring unit, then return to scrolling.
•
Pressing the button will manually scroll through the sensors and the digital inputs and outputs of the device.
•
The will toggle the currently selected output ON and OFF.
Rear Panel Connections
Due to safety, use only type SPT-2 cord or heavier duty cord.
Use proper size AWG copper wires for load and battery terminals.
Only connect and charge lead-acid AGM batteries configured to proper battery voltage to the battery charger terminal.
Figure 2. Rear panel connections.
Display
Status
Scan
Scroll
Toggle
AC
Power
Battery
Disconnect
Charger
Status
Alarm
Test
Output
AC
Fail
Charger
Fail
Battery
Low
20.84
mm
20.84
mm
AGM
Lead-Acid
Battery Bank
-
+
Load
-
+
AC INPUT
ETHERNET
Supervisory for battery only
With built-in resistor
Sensor wire does NOT crimp with
the main battery wire
FRAME
GROUND
