DuraComm HE1U-5012-BC-MU, Product User Manual

Page: 3 / 23

3
of 23
August 3, 2016
LOW VOLTAGE DISCONNECT with RELAY
Maximum Interrupt Current / continuous current ................................................................................................................75 Amps DC
Disconnect Voltage................................................................................................................................................................. 10.5 VDC
Reconnect Voltage ................................................................................................................................................................. 12.5 VDC
Disconnect Delay.......................................................................................................2 minutes @ less than preset disconnect voltage
INSTALLER NOTES
NOTE: DO NOT block any of the cooling vents on the sides and top and always allow adequate ventilation by not installing the unit
inside tightly closed spaces. Physical mounting position is not critical but the cooling vents must not be blocked.
NOTE: The outputs are NOT referenced to the chassis. The Modular System can be used either positive or negative ground.
FRONT PANEL LAYOUT