DuraComm HE1U-5012-BC-MU, Product User Manual

Page: 13 / 23

13
of 23
August 3, 2016
Device Info
A custom site name can be entered here, and the model number, serial number, software version, and hardware version
are shown here.
Logging
The HE1U-­‐5012-­‐BC-­‐MU will log all measurements and alarms to an SD card that is plugged into the HE1U-­‐5012-­‐BC-­‐MU
board. Users can set the rate here, as well as clear the card, or append new measurements. The CSV log file can be
downloaded here, as well as the Status page. If the SD card fills up, the oldest sample is discarded when a new one is
stored. The HE1U-­‐5012-­‐BC-­‐MU custom device name is stored with the logged data, so that the source of the card can be
identified after it removed from the HE1U-­‐5012-­‐BC-­‐MU.
For firmware 2.2, the log file will be automatically renamed and a new one started when the file size reaches 5MB.
Download all log files before deleting them!
With REV 2.3 Firmware, the ability to log readings when an alarm occurs has been added. To turn off periodic logging,
just enter 0 as the logging rate. You can set up logging to occur only on alarms, periodically, both or none.
SNMP MIB File Download
The SNMP MIB File can be downloaded from this page.
Date and Time Settings
Configuration for all date and time settings. Date and time is battery backed up on the card, and the values are saved in
the logged samples. The real-­‐time-­‐clock can synchronize it’s time to the network through an NTP server, or it can be set
manually if a network is not available.
The NIST NTP servers can be used by entering
time.nist.gov or pool.ntp.org,
or another NTP server address into
the
NTP Server box.
Miscellaneous Settings
With Firmware 2.0, you can set the number of significant digits for the Analog Voltage readouts on the Status page, as
well as set the temperature units.
.