DuraComm HE1U-5012-BC-MU Product User Manual Download Page 1

   

1

   of   23   

August   3,   2016

 

9   

   

HE1U-­‐5012-­‐BC-­‐MU   

High   Efficiency   1U   AC   to   DC   Power   Supply   

Owners   Guide   

(These instructions are intended for use by a technician familiar with electronic products) 

 

 

 

Integrated Float Charge Circuit 

 

Integrated Low Voltage Disconnect 

 

Selectable Input Voltage 110 or 220 VAC 

 

Remote Monitoring of Power Supply Voltage and 
Current, Battery Voltage and Current, and an External 
Alarm. 

 

Remote control of power supply ON/OFF and External 
Alarm output ON/OFF via Web Interface 

 

Short Circuit / Overload / Over Voltage / Over 
Temperature Protection  

 

Manual Battery Disconnect Switch 

 

3 year warranty

 

DESCRIPTION 

The HE1U-5012-BC-MU is a Heavy Duty AC to DC 750 Watt Power Supply, a low voltage disconnect, and a float charge 

circuit in a 1U chassis. The HE1U-5012-BC-MU comes with power factor correction, and four layers of protection against overload, over 
voltage, over temperature, and short circuit. This model also comes with a manual battery disconnect switch, internal power supply 
ON/OFF remote control, and DC-OK. The HE1U-5012-BC-MU comes with a 3 year warranty. 

The new internal Remote Monitoring and Control Unit (RMCU), provides the ability to remotely monitor the AC voltage, power 

supply current and voltage, battery voltage and current, and internal temperature, as well as the ability to remotely control the ON/OFF 
State of the power supply unit, all via the internet using any standard web browser. A mobile-friendly version of the status page is also 
included.  

Users that have access to the network can view the status of the power supply, control outputs, and the alarm conditions, as 

well as download a .CSV file of logged states. Administrative users can access the setup screens and change the control settings by 
logging into the RMCU via the browser. Alarm conditions are configurable, and can include over and under thresholds. Alarm 
notifications can be configured by an administrator to send email and SNMP traps. Setups are saved in non-volatile RAM, and a battery 
backed up real-time clock is provided to timestamp information logged to the internal SD card. Logging rate is user settable. 

The HE1U-5012-BC-MU comes with the DuraComm three-year warranty. 

   

Summary of Contents for HE1U-5012-BC-MU
























Reviews: