Slide one decorative knuckle (part 10)
over each connector tube and post
end. Slide the knuckle down to the
screws fastened in step 14.
Insert one arbor top connector tube
(part 9) into end of each post with
three pilot holes. Connector tube will
insert half way, resting on cross rail
(at black mark).
Using ¾” kappet screws, fasten
connector tubes to posts. Snap
kappet screw caps over screw heads.
16
Join posts with arbor top by inserting
connector tubes into free ends of
arbor top.
Using ¾” kappet screws, fasten arbor
top to connector tubes. Snap kappet
screw caps over screw heads.
14
15
