Using only one arbor top half from
step 8, slide one arbor top connector
tube (part 9) into ends where arbor
top half is fastened together.
Connector tube should be inserted
half way (up to black mark)
Lay out one arbor top arch half
(part 8). Insert four 36¾” rails
(part 11) into arch half. Slide another
arch half over 36¾” rails.
Using 1½” kappet screws, screw
together arbor top half. Be sure that
all parts are fully inserted before
securing. Snap kappet screw caps
over screw heads.
REPEAT
using
remaining
two arbor top arch halves
and
four
36¾”
rails.
9
Using ¾” kappet screws, fasten both
connector tubes to arch halves. Be
sure connector tube is only inserted
half way (up to black mark). Snap
kappet screw caps over screw heads.
8
10
