Lay out one outside vertical rail (part 5).
Insert one 16” rail (part 7) into center
hole. Insert free end of 16” rail through
center hole of one middle vertical rail
(part 6). Insert free end of the 16” rail
into center hole of another outside
vertical rail (part 5).
On each end of assembly, slide vertical
rails through one center cross rail
(part 4). Slide center cross rails all the
way to 16” rail.
On each end of assembly, insert one
16” rail through middle vertical rail
and into outside vertical rails. The
vertical rails will need to be flexed to
slide 16” into open holes.
Slide center cross rails away from
middle 16” rail. Center cross rails
should be centered between 16” rails.
1
2
3
4
