Insert free ends of vertical rails into
corresponding holes of each top/
bottom cross rail (part 3).
Lay out one right post (part 2). Insert
cross rails of assembly into
corresponding holes of right post.
Slide left post (part 1) onto
corresponding holes of assembly. Be
sure top of posts with 3 pilot holes are
at same end of arbor panel.
Using 1½” kappet screws, screw
together arbor panel. Be sure that all
parts are fully inserted into the posts
before securing. Snap kappet screw
caps over screw heads.
REPEAT steps 1-7 for second arbor
panel.
5
6
7
