Dupont Modulo Comfort, Manual For Use And Maintenance

Page: 15 / 32

15
MODULO
COMFORT
THORACIC SUPPORTS
*if this option is ordered with
the chair, the vertical rail
guidance will already be
fixed to the backrest.
*If the option is ordered
after the purchase, take off
The height of the thoracic
supports can be adjusted
by means of the toothed
wheel on the rail
R
.
the two little black cards on the tube. Put the rail into
place with the screws and the nuts supplied.
Position the support against
the patient’s side. Make sure
the patient is immobilised and
comfortable.
To do this unscrew the toothed
wheel
T
1
to enable the pad of
the thoracic support
B
to be
COMMODE SEAT
The commode seat is put in place of the seat base (see paragraph dedicated to the assembly page 13 and photos 1and
1A) . The diameter of the guides of the seat base allows only positioning on notch No 3 then the commode seat will
always be in the horizontal position.
F I T T I N G O F A T T A C H M E N T S
Photo 13
Photo 15
Photo 14
T
C
R
C
1
B
1
T
C
P
1
T
1
rotated by using
T
.
The support pad can be turned around 360° around the
pivot
P
1
.
To take the thoracic support off, lift and swing away. It is not
necessary to unscrew the parts
P
.
TRAY/TABLE
Mounting arm
Mounting arm
Spacer for width
adjustment
Tray support
SEAT
37 : none
41 : 1 spacer
46 : 2 spacers
Tray in folded
position
Photo 18 Photo 19
ASSEMBLY OF THE MODULO COMFORT TRAY
- The tray is especially designed with
an ergonomic shape for the chair
- The tray is adjustable in
length and incline
- Height of tray is dependent upon
height of the armrest
ASSEMBLY OF THE TRAY SUPPORT
Unscrew the two screws M6 to fix the braket to the frame.
Position the tray support
(see photo)
Assemble the 2 screws M6
Screw on the 2 nuts M6
Protect the screws heads with 2 covers M6
(parts supplied with the tray)
TRAY WIDTH
Depending on the chair width you
have to insert some adjustment
spacers between the arm and the
locking collar.
(Supplied with the
tray in kit form)
Assembly instructions delivered
(with the tray)
DESCRIPTION
Painted wooden tray with ergonomic shape.
Swings clear for
occupant transfer
Adjustment knob for the inclining of the tray
Adjustment knob for height of tray
Tray adjustable in depth
Reclining tray
Tray adjustable in
height
(Depending on the
height of the armrest)
Reclining tray
2 screws M6
2 nuts M6
Tray
support
Photo 16
Photo 17
TO MOVE THE REAR WHEELS BACKWARDS
See “fitting the extension kit” page 14.
INCLINE OF THE BACKREST (see page 14)