Duplomatic DDC4-10-400/20, Installation Manual

Page: 4 / 32

DUPLOMATIC E.M.DDC4-400V/RK RELEASE 1.9 07-09
EM DDC4-400-RK-0709gb.doc 4
1. GENERAL INFORMATION
The Duplomatic control unit is a compact system that controls all functions regarding positioning and driving of
the
SM* turrets Duplomatic . The interfacing to the lathe is powerful and simplified for an easy installation .
Serial line RS232 is set for diagnostic and remote control by PC.
CODE OF THE CONTROL UNIT
DUPLOMATIC
AUTOMAZIONE
MADE IN ITALY
Model: DDC4-10-400/20
Code: 0496320A03
S/N *********
DSP FW 2.4
I/O FW 5
TABLE SET 0489100
TABLE
SELECT
3-SM16
INERTI
A LEV.1 LEV.2
J (kgm
2
) 1,2 2,2
PTAB03 24V 0V
TOOLS 8 12
PTAB01 24V 0V
PTAB02 0V 24V
MAIN DIFFERENCES WITH DDC2 CONTROL RACK
1) New DDC4 controller inside: more robust – full digital DSP driven.
2) No 230V AC auxiliary supply: only 24V DC supply required. Connector X5 is kept for compatibility but
no more used. The CM1 supply therefore requires a little more current, so Fuse F7 now is set to 1 A T.
3) New Diagnosis software required (DDC4SW*.EXE).
4) No EPROM to change parameters: number of tools and turret model can be changed by the diagnosis
software.