Duplo DF-1200 Instruction Manual Download Page 65

Page: 65 / 98

3-25

Chapter 3 Advanced Operation

7-6. Setting ejection conveyance amount

Set the ejection conveyance amount to [Large] if double folded thick paper tends to unfold on ejection, stack

unevenly, or jam at the paper ejection section.

Other Setting1/5

Feed Interval

Stack Roll Adj

Belt Convey Vol

Press the menu key to display [Other

Setting].

Select [Belt Convey Vol] with the or

key.

Belt Convey Vol

Normal

Press the

key.

The [Belt Convey Vol] screen is displayed.

Press the

key.

At this stage the ejection conveyance amount

can be changed to [Normal] or [Large].

[Large] Use the or key to select [Large].

Belt Convey Vol

Large

Press the

key.

The selected item is set.

Press the

key.

Returns to [Other Setting].

Press the

key.

Returns to the top screen.

[Belt Convey Vol] is not reset until the power is turned off. However, it returns to [Normal] only when

the folding mode is changed from custom folding to standard folding.
[Belt Convey Vol] returns to [Normal] by turning off the power with [Oper Mode] set to [Normal].

However, it will start up with the setting contents changed in the [Last Fold] or [Stopper Fixed] even if

the power is turned off.

Summary of Contents for DF-1200



































































































Search results

Summary of Contents for DF-1200

Reviews:

Related manuals for DF-1200

Brands by name

Popular brands

Duplo DF-1200, Instruction Manual

Search results

Summary of Contents for DF-1200

Reviews:

Related manuals for DF-1200

Brands by name

Popular brands