manualshive.com logo in svg

Duplo DF-1200, Instruction Manual

Share
Download
Duplo DF-1200 Instruction Manual Download Page 47

3-7

Chapter 3 Advanced Operation

2.  Standard Folding of Non-Standard Paper

Standard folding of non-standard paper is a method to register the paper length of paper other than 

standard paper, select the standard folding mode, and fold paper.
Paper other than the six standard paper is called non-standard paper. (Five standard paper sizes for North 

America)
The foldable sizes are as follows. (Width x Length)

Paper feed

direction

Paper

Length : 182 to 457.2/

7.17 to 18.00

Width : 120 to 311/

4.73 to 12.24

Unit : mm/inches

Maximum  : 311 x 457.2 mm/12.24 x 18.00 inches
Minimum  :120 x 182 mm/4.73 x 7.17 inches
When performing gate fold, the maximum 

paper length is 432.0 mm/17.00 inches.

•  Standard paper which is stacked on the paper feed tray in the long edge feeding direction is 

considered non-standard paper.

•  The paper sizes which can be used may vary with the paper type, thickness, and printing 

state.

For standard folding, refer to Chapter 2 “3. Standard Folding of Standard Paper” (p.2-5).

Paper Size Set

Set

Auto

P Length

457.0

1 

 Press the menu key to display [Paper Size Set].

2 

Press the 

 key.

Setting can be changed at this stage.

Paper Size Set

Set

Man

P Length

457.0

3 

Press the   key or   key to select [Man].

4 

Press the 

 key.

The selected details are set.

Paper Size Set

Set

Man

P Length

457.0

5 

Press the   key to select [P Length].

6 

Press the 

 key.

Setting can be changed at this stage.

Summary of Contents for DF-1200



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands