manualshive.com logo in svg

Duplo DF-1200, Instruction Manual, Page: 66 / 98

Share
Download
Duplo DF-1200 Instruction Manual Download Page 66

3-26

Chapter 3 Advanced Operation

7-7.  Operation mode settings

The operation mode setting is used to set the folding stopper function of the folding plates 1 and 2 when the 

power is turned on.
The following modes can be set.
Normal mode

[Normal] : When the power is turned on, use the normal mode to start up in the normal setting state.

Refold mode

[Last Fold] : When the power is turned on, this machine starts up in the setting state used last.  

       However the machine starts up with [Interval Setting] set to [OFF] and [Detect OFF] to [ON].  

       The adjustment values of the folding plates 1 and 2 return to default values if they are not 

       registered.

Folding stopper fixed mode

[Stopper Fixed] : Use [Stopper Fixed] to delete the setting operation on the control panel when folding  

                 paper always in the same conditions. In this mode, when the power is turned on, this  

                 machine is always set to the same conditions automatically, and initial operation of  

                 the folding plates will not be performed. As the [Stopper Fixed] is automatically set to  

                 the same conditions, the folding mode and paper size cannot be changed. 

                 However the machine starts up with [Interval Setting] set to [OFF] and [Detect OFF] to  

                 [ON]. The adjustment values of the folding plates 1 and 2 return to default values if  

                 they are not registered.

Other Setting1/5

 Feed Interval

 Stack Roll Adj

 Belt Convey Vol

1 

Press the menu key to display [Other 

Setting].

Other Setting2/5

 Oper Mode

 Test Feed Set

 Power Save Set

2 

Select [Oper Mode] with the   or   key.

Oper Mode

Normal

3 

Press the 

 key.

The [Oper Mode] screen is displayed.

4 

Press the 

 key.

At this stage the mode can be changed to 

[Normal], [Last Fold], or [Stopper Fixed]

5 

Select a mode with the   or   key.

Oper Mode

Last Fold

6 

Press the 

 key.

The selected details are set.

7 

Press the 

 key.

Returns to [Other Setting].

Summary of Contents for DF-1200



































































































Reviews:

No comments