Factory Reset
Press/Hold both footswitches while powering up the
pedal. This will reset the pedal to the original factory
settings and presets.
Tech Specs
Type of circuitry: All-analog signal path using Bucket-
Brigade Devices with digital control of functions.
Bypass: True hard-wire bypass with selectable
active-bypass trailing repeats mode
Control functionality:
Mix – Wet signal 0% to 200% (Dry fixed at 100%)
Repeats – Continuous adjustment from one echo
to full runaway
Time – Normal: 37ms to 1200 ms; Micro: 6ms to 300ms
Depth – Modulation from off to Insane
Rate – 10 seconds per cycle to 10 cycles per second
Mode – Four fractional beat settings plus four exotic
modes (see user manual)
Auxiliary Functions: Expression pedal sweeps smoothly
between two user-selected control settings. Insert jack
provides and wet channel insert loop and wet-only output.
Input Impedance: 1 Megohm
Output Impedance: 1000 ohms
Gain Range: Dry Channel: unity gain.
Wet Channel: off to +6dB maximum.
Note: The Wet Channel has different specifications
below due to its use of analog Bucket Brigades.
THD: Dry channel: 0.003% @ 1Vrms output
