Initial Setup
Power the Vapor Trail Deluxe with a 9-18Vdc (center
negative) power supply capable of providing at least
150 milliamps. Connect your instrument to the input
jack and send the output to your amplifier, mixer, or
interface.
The Vapor Trail Deluxe comes with 3 presets saved in
locations 1-3 that you can use to preview the pedal. You
can start with one of these and modify them to your lik-
ing. You can also go to Manual Mode M (no preset LEDs
lit) which reads the current physical knob settings.
When creating your own effect, we suggest starting
by setting the MIX knob at 12:00 o’clock, the REPEATS
knob at 9:00, the DEPTH/MULTI and RATE knobs fully
counterclockwise. The MODE control can be set to
whichever delay setting you would like, but mode 1 (1/4
note) is always a good place to start with. You can then
use the Depth/Multi and Rate knobs to add modulation
to the delay.
Controls
ON/BYPASS
The primary function of the left footswitch is to engage
or bypass the circuitry. When the effect is engaged the
left LED will be lit.
SELECTING A PRESET (PRESET MODE)
• To select a stored preset press and hold the left
