• Press the Right footswitch to desired Preset location.
• To save, Press & Hold both footswitches for 1 second.
The 2 LEDs next to the Preset will flash indicating the
new settings have been saved.
NOTE: When you are in PRESET SAVE mode and you
want to exit without saving press the Left footswitch. Or
after 5 seconds the pedal will exit PRESET SAVE mode.
TRAILS MODE (ON/OFF)
This is set by pressing and holding the Left footswitch
while powering up the pedal.
1. Tails Mode OFF:
• Press and hold the Left footswitch while powering up
the pedal. If the left LED turns on and off, then trails
mode is off.
2. Tails Mode ON:
• Press and hold the Left footswitch while powering up
the pedal. If the LED flashes 3-times, then trails mode
is on.
NOTE: When the pedal is set to trails ON mode, the
bypass LED will do a fast fade only when you bypass the
effect. If the pedal is set to trails OFF mode, the light will
turn on and off with no fade.
Special Delay Modes
MICRO DELAY (MODE POSITION 5)
• Delay Time Range: 6ms – 300ms
• This mode is great for slap back or double track guitar
sound.
