background image

 

USE AND CONTROL 

– DUAL ZONE  

  

The Controls of Your Unit 

  

 

 

 

POWER 

 

To turn the appliance off, press and hold the 

 key for 5 

seconds  until temperature  display  goes out. To  turn the 
appliance on, press and hold the 

 key for 1 second until 

temperature display lights up.  

NOTE:

  Pressing  the 

 key  once  can  switch  off  the 

audible alarm when the alarm is on. 
  

UP

  

  

To increase (warm) the set temperature by 1°C or 1ºF.  
  

DOWN

  

  

To decrease (cool) the set temperature by 1°C or 1ºF.  

 
LIGHT

 

  

Used to turn the inner light on/off.  
 

Display  

Display the digital temperature and service indicators.  

 is  for  UPPER  temperature  zone  and   is  for  LOWER 

temperature zone.   

 is for LEFT temperature zone and  

 is for RIGHT  

temperature zone.  
 

 

Indicator Light  

The indicator light is located at the right lower corner of 

the display. The indicator light will be on when the multi-
key  function  is  selected.  To  perform  the  multikey 
function, press and hold the first key, then press the rest 
key for at least 5 seconds and then release all the keys.   

  

ºF/ºC Selector  

Select  the  temperature  display  setting  in  Fahrenheit  or 

Celsius  degree.  To  change  the  temperature  from 
Fahrenheit  to  Celsius  or  from  Celsius  to  Fahrenheit, 
press and hold the LIGHT key for 5 seconds.  

  
Key Lock (Only for models with outside controls) If in 2 

minutes or longer without touching any key, the key lock 
will be activated automatically. To remove the lock, press 
the UP and DOWN keys at the same time for at least 5 
seconds  and  the  indicator  light  will  flash  three  times  to 
confirm the action.  

  

Setting the Temperature Control  

• 

The unit has two separate temperature zones. The 
temperature of both zones can be set between 

+5ºC 

and 

+20

ºC 

(41ºF 

and 

68ºF)*****. 

The 

LOWER/RIGHT  temperature  zone  is  ideal  for 
storing white and red w

ine at a setting of +13°C to 

+20°C  (55°F  to  68°F)*****.  The  UPPER/LEFT 

temperature zone is suitable for storing champagne 
and white wine at a setting of +5°C to +13°C (41°F 
to 55°F).  

  
• 

When the unit is plugged in for the first time, the unit 
will  power  up  automatically  to  the  preset  defaults. 
The  preset  temperature  at  the  factory  for 
UPPER/LEFT  temperature  zone  is  +10ºC  (50ºF) 
and for LOWER/RIGHT temperature zone is +16ºC 
(60ºF).  

  
• 

You can press the left side

 UP

 and 

DOWN 

keys to 

control the internal temperature of the UPPER/LEFT 
temperature zone and press the  right  side  UP and 
DOWN  keys  to  control  the  internal  temperature  of 
the  LOWER/RIGHT  temperature  zone.  When  you 
press the two keys at the first time, the display will 
show the last temperature set previously.  

  

• 

IMPORTANT:

 The temperature set for the LOWER 

temperature zone must  always be higher than that 
in  the  UPPER  temperature  zone.  For  optimal 
performance, the set temperature of the two zones 
should differ by at least 4°C.  
 

• 

The temperature that you desire to set will increase 
1ºC  or 1ºF if you  press the 

UP

  mark  once,  on  the 

contrary the temperature will decrease 1ºC or 1ºF if 
you  press  the 

DOWN

  mark  once.  The  display 

flashes while you make the setting.   

• 

After  the  temperature  has  been  set,  the  display 
shows the current inner temperature of the particular 
temperature zone.  

  
• 

To view the set temperature at any time, press the 

UP 

or 

DOWN

  key,  the  set  temperature  will 

temporarily flash in the display for 5 seconds. Then 
the  display  shows  the  current  inner  temperature 
again.  

  

USE AND CONTROL 

– THREE ZONE  

 

 

The Controls of Your Unit  
Upper Control Unit  

 

  

Lower Control Unit  

 

  

POWER 

 

To turn the appliance off, press and hold the 

 key for 5 

seconds  until temperature  display  goes out. To  turn the 
appliance on, press and hold the 

 key for 1 second until 

temperature display lights up.  

NOTE:

  Pressing  the 

 key  once  can  switch  off  the 

audible alarm when the alarm is on. 
 
  

  

  

Summary of Contents for DAUF-16.52
















Reviews: