background image

15

 

 

Display “E0”, “E1”. 
“E2”, “E3”, “E4”,  
“E5”, “E6” or “E7”.  

• 

“E0” indicates the communication error for 3 
zone models.  

• 

“E1” or “E2” indicates that the air temperature 
sensor is failed.  

• 

“E3” or “E4” indicates that the defrost sensor in 
the evaporator is failed.  

• 

“E5” indicates the defrost heater failure.  

• 

“E6” indicates the solenoid valve failure.  

• 

“E7” indicates the door switch failure.  

• 

Call for service.  

The alarm sounds  
and 

the 

temperature 
display flashes.  

• 

Has the appliance door been open for longer 
than 60 seconds? If not, then the  
temperature has risen higher or fallen lower 
than the temperature that has been set. This 
could be due to:  

• 

The appliance door being opened too often.  

• 

The ventilation opening being covered or too 
dusty.  

• 

A lengthy interruption to the power supply.  

• 

A large amount of bottles has been added to 
the unit.  

• 

If yes, close the door.   

• 

Do not open the door more often 
than necessary.  

• 

Clear the obstructions and clean 
the dust.  

• 

Leave the appliance to work for a 
while until the set temperature 
has been reached.  

The icon “--” is lit 
up and flashing in 
the temperature 
display.  

• 

The display temperature is out of the range.  

• 

Only temperatures within the 
range 0~99°F/-9~37°C the 
appliance can display will be 
shown. If the temperature is not 
within this range, the icon “--” will 
be displayed instead. That is 
normal.  

 

 

WARRANTY  

 

 

The warranty does not cover:  

 

1. 

Damage in transit or when moving the appliance. 

 

2. 

Any damages caused from negligence, accident, improper use, improper installation/service or 
use for purposes other than those described in the instruction manual. 

 

3. 

Damage caused by connecting your product to the wrong power source. 

 

4. 

Damage from power failure. 

 

5. 

Faulty installation or modification made during installation. 

 

6. 

Damage caused by unauthorized repair. 

 

7. 

Any damages resulting from force majeure, fire disaster or natural disaster. 

 

8. 

Alterations to the product without express permission from the manufacturer. 

 

9. 

Parts such as light, removable shelves, or plastic. 

 

10.  Any spoilage or damage to wines or any other contents incidental or consequential to possible 

defects of the unit. 

 

 

NOTE: The warranty clauses and specifications are subject to change without notice.  

***** 2018 production onwards 

 

Summary of Contents for DAUF-16.52
















Reviews: