10
LIGHT
Used to turn the inner light on/off.
UP
Used to increase (warm) the set temperature by 1°C or
1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C or
1ºF.
Display
Display the digital temperature and service indicators.
is for UPPER temperature zone,
is for MIDDLE
temperature zone and
is for LOWER temperature
zone.
Indicator Light
The indicator light is located at the right lower corner of
the display. The indicator light will be on when the multi-
key function is selected.
To perform the multikey function, press and hold the first
key, then press the rest key for at least 5 seconds and
then release all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or
Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press and hold the LIGHT key for 5 seconds.
Setting the Temperature Control
•
The unit has three temperature zones. The
temperature of all zones can be set separately.
•
The temperature settings of UPPER temperature
zone are adjustable with
the range +11º to +20ºC
(52º-68ºF)*****. The preset temperature at the
factory is +18ºC (65ºF).
•
The temperature settings of MIDDLE temperature
zo
ne are adjustable with the range +5º to +11ºC
(41º-52ºF). The preset temperature at the factory is
+8ºC (46ºF).
•
The temperature settings of LOWER temperature
zone are adjustable with the range +11º to +13ºC
(52º-56ºF). The preset temperature at the factory is
+12ºC (54ºF).
•
Temperature control for UPPER and MIDDLE
temperature zones is at upper control unit.
Temperature control for LOWER temperature zone
is at lower control unit.
•
When you press the two keys at the first time, the
display will show the last temperature set previously.
The temperature will increase 1°C or 1ºF if you press
the UP key once, on the contrary the temperature
will decrease 1°C or 1ºF if you press the DOWN key
once. The display flashes while you make the
setting.
•
After the temperature has been set, the display
shows the current inner temperature of the particular
temperature zone.
•
To view the set temperature at any time, press the
UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds. Then
the display shows the current inner temperature
again.
TEMPERATURE DISPLAY
During normal operation, the temperature display on the
control panel shows the temperature inside the
appliance.
The temperature display will flash if:
-
A different temperature is being set,
-
The temperature in the zone deviates by more than
5°C from the set temperature.
The temperature display flashing ensures that the
temperature can not rise or fall un-noticed and impair the
wine.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption
(power surge,
breaker switch, etc.)
, the unit remembers the previous
temperature settings. When the power is recovered, the
cabinet temperature will go back the same setting
temperature as before the power interruption.
TEMPERATURE ALARM
An alarm will sound if the temperature in one of the zones
rises or falls outside the temperature range. The relevant
temperature display will flash at the same time.
The temperature the appliance is set at determines the
temperature the appliance recognises as being too warm
or too cool.
The alarm will sound and the temperature display will
flash:
-
When you switch the appliance on, if the temperature
inside the appliance is very different from the
temperature set.
-
When there has been a lengthy interruption to the
power supply.
-
When too many items have been
put into the unit at
one time.
-
When
the door is not closed tightly.
DOOR ALARM
If the door has been left open for more than 60 seconds,
the alarm will sound.
Once the set temperature has been reached in the
appliance, the alarm stops and the relevant temperature
display stops flashing. However, if the noise disturbs you,
you can switch the alarm off before this if you wish by
pressing the POWER key once. The alarm will stop.
