Projector management via SNMP
Projector management via SNMP
When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a
specified PC.
• It is recommended that SNMP functions be carried out by a network
administrator.
• SNMP management software must be installed on the computer to monitor
the projector via SNMP.
NOTE
SNMP settings
Configure the following items via a web browser to use SNMP.
Example: If the IP address of the projector is set to 192.168.1.10:
• A Network Restart is required after the SNMP Trap configuration
settings have been changed. Click
[Network Restart]
and configure the
following items.
NOTE
(
9
)
5) Click
[Security Settings]
on the main menu.
6) Click
[SNMP]
and set the Community Name on the screen that is displayed.
• A Network Restart is required after the Community Name has been
changed.
• Click
[Network Restart]
and configure the following items.
NOTE
7) Configure the settings for Trap transmission of Failures/Warnings. Click
[Alert Settings]
on the main menu and select the Failure/Warning item to be
configured.
) Click the
[Enable]
check box to send out the SNMP trap for Failures/Warnings.
Clear the
[Enable]
check box when SNMP trap transmission is not required.
9) Click the
[Apply]
button to save the settings.
) Enter
[https://192.168.1.10]
into the address bar of the web browser.
) Enter the Administrator ID and Password and click
[Logon
].
3) Click
[Port Settings]
on the main menu.
4) Click the
[Enable]
check box to open the SNMP Port.
Set the IP address to send the SNMP Trap to when a Failure/Warning occurs.
