Dukane ImagePro 8918 User Manual Download

Page: 96 / 137

Settings

Network Information

All screen images displayed in this manual are

screens of a logon using an administrator ID.

Any administrator only functions will not be

displayed when using a user ID. Refer to the

descriptions in each table.

Displays the projector’s current network configuration settings.

Item

Description

DHCP

Displays the DHCP configuration settings.

IP Address

Displays the current IP address.

Subnet Mask

Displays the Subnet Mask.

Default Gateway

Displays the Default Gateway.

MAC Address

Displays the MAC address.

Firmware Date

Displays the network firmware time stamp. This information is only

displayed when logged on using an administrator ID.

Firmware Version

Displays the network firmware version number. This information is

only displayed when logged on using an administrator ID.

Summary of Contents for ImagePro 8918










































































































































Search results

Summary of Contents for ImagePro 8918

Reviews:

Related manuals for ImagePro 8918

Brands by name

Popular brands

Dukane ImagePro 8918, User Manual

Search results

Summary of Contents for ImagePro 8918

Reviews:

Related manuals for ImagePro 8918

Brands by name

Popular brands