STACK menu settings
21
● The Main and Sub projectors have the following common settings.
- AV MUTE (
Operating Guide
→
Temporarily turning off the screen and audio
)
- Magnifying feature (
Operating Guide
→
Using the magnify feature
)
- ASPECT and OVER SCAN (
Operating Guide
→
IMAGE menu
)
- COMPUTER IN (
Operating Guide
→
INPUT menu
)
- OSD MESSEAGE (
Operating Guide
→
SETUP menu
)
- MY BUTTON (
Operating Guide
→
OPTION menu
)
- TEMPLATE (
Operating Guide
→
SCREEN menu
)
- SHADE (
Operating Guide
→
Temporarily shading the screen
)
- SHADE TIMER (
Operating Guide
→
OPTION menu
)
- PbyP/PinP (
Operating Guide
→
PbyP/PinP
)
● The following functions are disabled.
-
STANDBY MODE (
Operating Guide
→
SETUP menu
)
-
AUTO SEARCH (
Operating Guide
→
OPTION menu
)
-
DIRECT POWER ON (
Operating Guide
→
OPTION menu
)
-
AUTO POWER OFF (
Operating Guide
→
OPTION menu
)
-
COMMUNICATION TYPE (
Operating Guide
→
OPTION menu
→
SERVICE
→
COMMUNICATION
)
-
SOURCE SKIP (
Operating Guide
→
OPTION menu
)
●
LAN
port cannot be selected.
● When the projectors are in the PbyP/PinP mode, the SUB INPUT SOURCE is
fixed at FOLLOW MAIN UNIT.
● When Intellectual Stack is in use, an error message will be displayed if an error
occurs on any of the projectors.
When an error occurs, a full dialog will be displayed on screen. The full dialog
changes to a small dialog after about 20 seconds without any key activity. While
the small dialog is displayed, pressing the ◄ button displays a full dialog again.
The numbers “
1
” and “
2
” above the projector icons represent the Main and Sub
projectors respectively.
Refer to the on-screen messages as shown below
and take the necessary actions to resolve the
problem.
(continued on next page)
3.7 Important information for Intellectual Stack
(continued)
Full dialog
Small dialog
