STACK menu settings
18
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. (
19
)
NOTE
• When the projectors are in the PbyP/ PinP mode, the SUB INPUT
SOURCE is fixed at FOLLOW MAIN UNIT.
• If FIXED (COMPUTER IN) is selected, the
COMPUTER IN
port can be selected
as an input source on the Main projector.
When any button to select an input
port on the remote control or the
INPUT
button on the projector is pressed, the
MAIN INPUT SOURCE dialog will be displayed on screen.
• If FIXED (COMPUTER IN) is selected, the
COMPUTER IN
port on the Sub
projector should be connected to the
MONITOR OUT
port on the Main projector
with a computer cable. The image from the selected port is output from the
MONITOR OUT
port on the Main projector to the
COMPUTER IN
port on the
Sub projector.
• If FIXED (COMPUTER IN) is selected, video signals can be input to the
COMPUTER IN
port on the Main projector. Set the port for video signal input
in the COMPUTER IN menu and set the video format in the VIDEO FORMAT
menu. Refer to
Inputting image from Main to Sub
(
24
) and
Inputting image
from Main to Sub - Video signal (either component or video)
.
(
28
)
3.5 Selecting input source for Sub
1.
Highlight SUB INPUT SOURCE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the SUB INPUT SOURCE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT or FIXED
(COMPUTER IN).
FOLLOW MAIN UNIT
: Sets the input source on the Sub projector to the same
port as Main.
FIXED (COMPUTER IN)
: Sets the input source on the Sub projector to the
COMPUTER IN
port which is connected to the
MONITOR OUT
port on the
Main projector.
