Connecting cables
24
Inputting image to Sub and Main individually
1.
Split the output signal from your image device into two with device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Simple Stack
•
COMPUTER IN
can be used as the input
port for the projector that is connected with
a computer cable at its
MONITOR OUT
port.
If you wish to use other input ports, input the
image to Sub and Main individually.
Inputting image from Main to Sub
1.
Connect the
MONITOR OUT
port on Main
to the
COMPUTER IN
port on Sub with a
computer cable.
2.
Connect the image output device to one of
the input ports on Main.
4.2 Connecting signal cables
There are two methods to input image to the Sub projector. (
18, 19
)
- Inputting image from the
MONITOR OUT
port on Main to Sub.
- Inputting image to Sub and Main individually.
NOTES for Intellectual Stack
•
COMPUTER IN
can be used as the input
port for the Main projector in Intellectual Stack.
Do not use other ports for image input.
- You can input component signals to
COMPUTER IN
.
- You can input video signals to the Y pin of
the component video of
COMPUTER IN
.
NOTES for Intellectual Stack
•
LAN
cannot be used as the input port on
the Main projector in Intellectual Stack.
NOTES for Simple Stack
• Any of the ports that is compatible with the
signal can be used. Input the same signal to the two projectors individually.
Connection example
in Intellectual Stack
Sub
Main
Main
Sub
CP-WU8600/CP-WX8650/CP-WX8750/CP-X8800
CP-WU8700
