7
1. Introduction
Filter cover
Preparation: Remove the filter cover from the projector.
Refer to the clause “Replacing the filter” on page
about the filter cover installation.
1. Insert the round protrusion at the filter cover strap end (resinoid strap) to the hole on the filter cover.
2. Insert the square protrusion at the opposite end of the filter cover strap to the hole on the projector body
and rotate the strap 90°for fixation.
It becomes easier to fix the strap if you remove the filter once.
Hole for fixing the strap
Rotate the strap 90°
How to paste the input selection character sticker of the remote control
• Peel off the cover of the sticker and align the sticker holes with Buttons 1 to 6 before pasting.
• Please take care not to let the sticker contact the buttons when pasting.
• The explanations and illustrations in this manual are provided with the sticker pasted.