56
3. Convenient Features
LOAD BY
SIGNAL
OFF
If input signal is switched, the lens will not shift to the les shift, zoom and focus val-
ues for the selected [PROFILE] number.
ON
If input signal is switched, the lens will shift to the
values for the selected [PROFILE]
number.
If no adjusted values have been stored to [LENS MEMORY], the lens will apply
[REF. LENS MEMORY] adjusted values. Alternatively, if no adjusted values have
been stored to [REF. LENS MEMORY], the unit will return to the default factory set-
tings.
FORCED
MUTE
OFF
Not turn off the image during les shift.
ON
Turn off the image during les shift.
NOTE: LENS MEMORY and REF. LENS MEMORY are future expansion functions.
⓫
Storing Changes for Lens Shift, Zoom, and Focus [LENS
MEMORY]
This function serves to store the adjusted values
when using the LENS SHIFT,
motorized ZOOM and motorized FO-
CUS
buttons of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need
to adjust lens shift, focus, and zoom at the time of source selection. There are two ways to save adjusted values for
lens shift, zoom, and focus.
Function name
Description
page
REF. LENS MEMORY
Adjusted values common to all input signals. At the time of installation,
two kinds of adjusted values can be stored.
If no adjusted values have been saved to [LENS MEMORY], the lens
will apply [REF.LENS MEMORY] adjusted values.
→
page
LENS MEMORY
Adjusted values for each input signal.
Use the adjusted values for the signal with a different aspect ratio or
resolution. The adjusted values can be applied at the time of source
selection.
→
page
NOTE:
•
The [LENS MEMORY] feature is not available for the lens unit,
NP11FL/NP12ZL/NP13ZL/NP14ZL/NP30ZL
.
• Be sure to carry out [LENS CALIBRATION] after replacing the lens.
To store your adjusted values in [REF. LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the
▶
button to select [SETUP] and press the ENTER button.
