Dukane 6752WU User Manual Download Page 101

Page: 101 / 293

5. Using On-Screen Menu

Entering the currently projected signal into the Entry List [STORE]

1. Press the

▲

▼

button to select any number.

2. Press the

◀

▶

button to select [STORE] and press the ENTER button.

Calling up a signal from the Entry List [LOAD]
Press the

▲

▼

button to select a signal and press the ENTER button.

Editing a signal from the Entry List [EDIT]

1. Press the

▲

▼

button to select a signal you wish to edit.

2. Press the

◀

▶

▲

, or

▼

button to select [EDIT] and press the ENTER button.

The Edit window will be displayed.

SOURCE NAME

Enter a signal name. Up to 18 alphanumeric characters can be used.

INPUT

The input terminal can be changed. The input terminal may be switched to HDMI1/HDMI2/Dis-
play Port/BNC/BNC(CV)/BNC(Y/C)/COMPUTER/HDBaseT ([ETHERNET] for MM models).

LOCK

Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. The
changes made after LOCK execution cannot be saved.

SKIP

Set so that the selected signal will be skipped during auto search.

3. Set the above items and select [OK] and press the ENTER button.

NOTE: The input terminal cannot be changed to the currently projected signal.

Summary of Contents for 6752WU






































































































































































































































































































Search results

Summary of Contents for 6752WU

Reviews:

Related manuals for 6752WU

Brands by name

Popular brands

Dukane 6752WU, User Manual

Search results

Summary of Contents for 6752WU

Reviews:

Related manuals for 6752WU

Brands by name

Popular brands