Height of the extended piping reverser
With fully extended piping reversers the clearance between
their upper edge and the cloth slider plate must be approx. 115 mm.
–
Loosen lock nut 4.
–
Set the height of the extended piping reverser by turning the rod 3.
Thereby align the reversing tools of the piping reverser parallel to
the pocket opening.
–
Secure rod 3 against turning and tighten lock nut 4.
Converting the reversing tools by altered needle clearance
When changing to another needle clearance NA:
–
Replace the rings 1.
–
Adjust the number of plates 2 to the new needle clearance.
Note:
The individual operating steps of the piping reverser can be tested in
the aid programs P43 to P45
(see Short Description Microcontrol).
1
15 mm
1
2
3
4
33
