–
Slightly loosen screws 8 and insert press pad 10.
–
Slightly tighten screws 8.
–
Adjust the height of press pad 10.
The height of the press pad must be adjusted to suit the thickest
sewing material. Ensure that no material is piled up in front of the
press pad.
–
Align the stitch hole of the press pad 10 to the needle.
–
Tighten screws 8.
–
Insert the movable blade 6 into the blade holder 7.
The blade drive must be engaged in the slot of the blade.
–
Secure covering plate 4 with the four screws 1.
–
Adjust cutting pressure (see chapter 2.12.2).
3-
21
10
9
8
4
3
2
1
7
6
