3.7
Material clamp guide
Caution! Risk of injury!
Switch off main switch.
Check and adjust material clamp guide only when the sewing machine
is switched off.
Instruction and inspection
Screw 1 prevents the material clamp from slipping off the drive belt.
There must be a distance of approximately 0.5 mm between
screw 1 and the material clamp.
Adjustment
–
Place material clamp onto the conveyor belt.
–
Insert material clamp under guide 1.
–
Turn screw 1 until a distance of approx. 0.5 mm to the material
clamp is reached.
3-
39
1
