7
USE
Regulating the clock
Following interruptions to the power supply, it is necessary to set the time displayed by the clock inside
the hob.
To regulate the clock, press the buttons 7 and 8 together for at least 3 seconds.
The flashing digit to the left of the dot indicates the hours, while those to the right indicate the minutes. It
is possible to increase or decrease the hours using buttons 2 or 1 and by keeping buttons 2 or 1 pressed
the change in the number of hours takes place continuously.
To regulate the minutes, press the Clock button (7) again. The digits to the right of the dot will start
flashing. Now change the minutes in the same way as indicated for the hours.
Press the Clock button (7) to memorise the time programmed.
Releasing the burner
When a burner is locked the relative display shows the letter “b”. The burner is released by pressing
buttons 1 and 8 together constantly for at least 2 seconds. When released, the burners are reset to level
0, ready to be lit again.
N.B: if the release procedure is repeated 5 times in a row during a 15 minute time span, the device will
indicate FLT06 and will accept no further request for release for another 15 minutes.
Locking the control panel
This is activated by pressing button 8 only for at least 2 seconds. All burner levels will remain stable. The
control panel locked status occurs when the decimal points on the display of the capacity level related to
each burner light up. While the control panel is locked it is no longer possible to change the levels of the
burners or change the timer settings, but it is possible to switch off the hob by pressing the ON/OFF
button (safe switch-off).
It is not possible to release a locked burner when the control panel lock is active. It will be therefore
necessary to release the control panel before activating the burner release procedure.
Releasing the control panel
The control panel is released by pressing button 8 and button 2 for at least 2 seconds. The control panel
is released when the flame level points on the display go out.
Child lock function (
for the hobs with
DUAL burner).
It is activated only with hob off by pressing the button 8 for at least 3 seconds. The activation of the
Child Lock function is visible through the switching on of the decimal points on the flow rate level
displays of each burner and entails the complete lock of the keyboard.
The function is deactivated by pressing again the button 8 for at least 3 seconds (the unlock of the
keyboard is visible through the switching off of the decimal points on the flow rate level displays).
It is not possible to release a locked burner when the control panel lock is active. It will be therefore
necessary to release the control panel before activating the burner release procedure.
