!
To avoid accidental opening of the rescue system, pins closing the container must be checked before each flight!
The rescue chute must be periodically aired and repacked according to its manual. Zerogravity harness will best accommodate light
rescue chutes: Globe Light 90, Globe Light 110 or Globe Light 135 manufactured by Dudek Paragliders. It is possible to use rescue
parachutes by other manufacturers too, as long as their dimensions when packed do not exceed those of the container.
i
ZeroGravity harness is designed as ready to accept a steerable rescue chute. Such a parachute can be installed in the #2 container
only. The risers of this parachute should be attached directly to the hangpoints on the shoulder straps, without additional V-strap
(page 20-22).
When a steerable chute is installed, it is recommended to use the Quick Out carabiners with an automatic speedsystem
release Hkar141 (page 38-41).
30
Summary of Contents for ZEROGRAVITY
